| Measuring principle: |
UV-Absorption |
| Wavelength: |
254 nm |
| UV source: |
Electrodeless low-pressure mercury lamp |
| Stabilization method: |
Double beam (reference beam) method |
| Optical cell: |
Fused silica (Suprasil) |
| Optical cell heating: |
approx. 70°C |
| Measuring range: |
lowest range: 0...1 µg/L
highest range: 0...100 mg/l |
| Response time (99% signal): |
approx. 1 minute |
| Carrier gas: |
Air, approx. 30 L/h, 1 bar |
| Pump for liquids: |
Multichannel peristaltic pump |
| Reduction reagent: |
Tin-II-chloride or alternatively sodiumhydroborate |
| Reagent consumption: |
approx. 3 l / week for each reagent |
| Sample digestion: |
HCl or H2SO4, KMnO4 or H2O2 or Fenton´s Reagent or Na-chlorate (depending on sample composition) |
| Liquid-gas separation: |
Aerosol-free principle |
| Input device: |
Waterproof membrane keypad |
| Display of readings: |
Graphical LC display with background illumination |
| Output for concentration: |
4...20 mA; RS 232 bidirectional |
| Output for status: |
Operational - Service - Malfunction, according to NAMUR 64 recommendations |
| Housing: |
Fibreglass-reinforced polyester, for use in highly corrosive environment - Reagent storage cabinet made of chemically resistent plastic material |
| Protection class: |
IP 66 (EN 60529/ NEMA 3; 3R; 4; 4X; 12; 13) |
| Power Supply: |
230 V / 50 Hz (115 V / 60 Hz option) |
| Power consumption: |
250 W max. |
| Air consumption: |
Instrument air, approx. 30 l / h,
1 - 6 bar (14 - 85 psi) |
| Dimensions: |
775 x 612 x 329 mm (WxHxD) |
| Weight: |
approx. 50 kg |
 |
As a leading supplier of high precision analytical equipment, we strive at all times to offer top quality solutions. Our products are manufactured according to the ISO 9001 quality regulations. |
